欧洲杯正规下单平台

标准光?

标准协议光?

兼容协议光?

其它种类光器件

技术支持

QSFP+ to XFP(4) Breakout Cable, 1-Meter, Passive

QSFP+ to XFP(4) Breakout Cable, 1-Meter, Passive

0.0/5 rating (0 votes)

Description

QSFP+ to XFP(4) Breakout Cable, 1-Meter, Passive

Product Description
F-tone Networks's QSFP+ to 4x XFP+ copper DAC cable is a 40GBase QSFP+ hybrid passive cable. A side is a QSFP+ connector, B side is 4 XFP+ connectors. It’s an application for the link with QSFP+ port on 40Gb/s rate switch or host and feeds up to 4 upstream 10Gb/s switch or host.

Specifications:
● QSFP (40G) to 4x XFP (10G) Splitter Cable - 1m (3.3 ft) (QSFP-4XFP10G-CU1M)
● Connector A: (1) QSFP 40.0 Gb/s Rated Connector (SFF-8436 Compliant)
● Connector B: (4) XFP 10.0 Gb/s Rated Connectors (INF-8077i Compliant)
● Economically Links up a QSFP port with an Upstream 10GbE-XFP Switch
● AWG30
● Protocol agnostic support of 40GbE, QDR InfiniBand, SAS & Fibre Channel
● Up to 10.3125 Gb/s transfer rate per XFP channel (40 Gb/s aggregate)
● Robust Zinc die-cast XFP & QSFP connectors with pull-to-release latching
● Bridge the gap between your 10G and 40G capable switches/host adapters
● Low cross-talk and pair-to-pair skew maintains signal integrity
● Fully compliant to the latest XFP & QSFP MSA (Multi-Source-Agreement)
● Supports all current 10-Gigabit Ethernet and 40-Gigabit Ethernet standards
● Designated form factor and electrical compliance for QDR InfiniBand
● The perfect direct attached storage splitter cable for Fibre Channel & SAS
● Enjoy a reduced power budget and lower port cost compared to optical
● Fully RoHS compliant for environmental protection

F-tone Networks's QSFP+ to four SFP+ copper direct-attach cables are suitable for very short distances transmission and offer a highly cost-effective solution to connect within racks and across adjacent racks. These cables connect to a 40G QSFP+ port of a F-tone Networks's switch on one end and to four 10G SFP+ ports of a F-tone Networks's switch on the other end. F-tone Networks's currently offers cables in lengths from 50cm to 7m.

F-tone Networks's QSFP+ to 4x XFP Direct Attach cable is a high performance integrated duplex data link for bi-directional communication over copper cable for length up to 1m. It is compliant with the IPF MSA (SFF-8432) and QSFP+ 10 Gbs 4X MSA (SFF-8436) for mechanical form factors and XFP MSA for direct attach cables. It supports speed up to 10Gb.

Order Information:

Description

Data Rate

Length

Cable Type

Temp. Range(°C)

QSFP+ to 4 SFP+ Copper Breakout Cable, 0.5-Meter, Passive

40Gbps

50 cm

Passive Twinax

0~70

QSFP+ to 4 SFP+ Copper Breakout Cable, 1-Meter, Passive

40Gbps

1 m

Passive Twinax

0~70

QSFP+ to 4 SFP+ Copper Breakout Cable, 2-Meter, Passive

40Gbps

2 m

Passive Twinax

0~70

QSFP+ to 4 SFP+ Copper Breakout Cable, 3-Meter, Passive

40Gbps

3 m

Passive Twinax

0~70

QSFP+ to 4 SFP+ Copper Breakout Cable, 5-Meter, Passive

40Gbps

5 m

Passive Twinax

0~70

40Gbase QSFP+ to 4 SFP+ DAC Cable, 3-Meter, Active

40Gbps

3 m

Active Twinax

0~70

40Gbase QSFP+ to 4 SFP+ DAC Cable, 5-Meter, Active

40Gbps

5 m

Active Twinax

0~70

40Gbase QSFP+ to 4 SFP+ DAC Cable, 7-Meter, Active

40Gbps

7 m

Active Twinax

0~70

40Gbase QSFP+ to 4 SFP+ DAC Cable, 10-Meter, Active

40Gbps

10 m

Active Twinax

0~70

 

 

 

 

 

 

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search

网站地图网站地图
友情链接:欧洲杯投注网  欧洲杯竞猜软件  欧洲杯官方买球  欧洲杯买足彩app推荐  欧洲杯外围竞猜  欧洲杯外围竞猜  欧洲杯投注网  欧洲杯下注平台  欧洲杯下注平台  欧洲杯线上买球  欧洲杯外围竞猜  欧洲杯外围竞猜  欧洲杯竞猜手机app  欧洲杯押注入口  欧洲杯正规下单平台  欧洲杯竞彩国外网站  欧洲杯正规下单平台  欧洲杯足球购买渠道在哪  欧洲杯买球APP  欧洲杯正规下单平台